POPHIES

Wall lights & picture lights · OEM / ODM / Private label

Decorative lighting,
precisely made.

Indoor wall lights and picture lights, developed and produced in one place for lighting brands, importers and distributors across Europe and North America — from the existing collection to small modifications and fully custom programmes.

Start an enquiry See the two families
  • Small-batch friendly
  • Your brand or ours
  • Two-year warranty
  • Nearly 20 years In LED lighting
  • From 100 pcs Standard minimum per model
  • About one month Brief to sample, selected projects
  • Two years Warranty on delivered orders

01 — Product families

Two families,
one supplier.

All development stays inside wall lights and picture lights, which is why we can go deeper on finishes, power modes and installation details instead of spreading across every lighting category.

Wall lights Image placeholder
WL — Family

Wall lights

Directional and decorative wall lighting for residential interiors, hospitality rooms and retail displays — sized to sit on a wall without dominating the room.

  • Hardwired, plug-in and rechargeable versions of the same form
  • Modern and period-style references for different interior languages
  • Finish, colour and mounting adjustments for your range
HardwiredPlug-inRechargeable
See power modes
Picture lights Image placeholder
PL — Family

Picture lights

Picture lights for paintings, photographs, prints and wall art in homes, galleries and museum rooms, where the light has to serve the object rather than the fitting.

  • Beam angle and colour rendering considered per artwork
  • Adjustable heads for even washing or tight accenting
  • Conservative light output to avoid glare on glazed frames
Artwork lightingGalleriesMuseums
See power modes

02 — Power modes

Hardwired, plug-in
or rechargeable.

The same fixture can be specified with the connection that suits the room — including walls that were finished long before anyone thought about lighting there.

Hardwired

Permanent supply for new build and renovation work where wiring is planned in advance. The cleanest result for a fixed lighting scheme, with no visible cable.

No visible cableWall switch ready

Plug-in

A visible cord and plug for rooms where the wall circuit stays untouched, and for interiors where installation time has to stay short.

No wall workQuick install

Rechargeable

Battery-powered wall and picture lights for walls that are already finished, where re-wiring is impractical. Battery and charge management extend the time between charges.

No wiringRetrofit

Power mode, charging behaviour and battery selection are confirmed per model before quotation.

03 — Selected models

A catalogue,
not a promotion.

Uniform angles, honest finishes and only the properties a buyer needs in order to compare. Full specifications, drawings and certifications live on each product record.

PL — 210
Arc Picture Light

Aged brass · Integrated LED · 2700 / 3000 / 4000K

RechargeableDimmable
WL — 142
Linear Wall Light

Matte black · Aluminium · Wall switch

HardwiredOEM available
PL — 328
Studio Picture Light

Brushed nickel · Cord & plug · Adjustable head

Plug-inCustomizable

Sample records shown for layout review. Model codes, names and specifications belong to the product entries and the family filter is driven by the product taxonomy.

04 — Technical reference

Details made
easy to compare.

Every model carries what a buyer needs to specify it: dimensions, light source, colour temperature, finish, control and warranty — with certification listed only where it actually applies.

480 MM 185 MM

PL — 210 / Aged brass

Power mode Rechargeable
Light source Integrated LED
Colour temperature 2700K / 3000K / 4000K
Finish Aged brass
Control Touch dimming
Warranty Two years
  • UL
  • ETL
  • CE
  • RoHS
Sample values, shown to check how the table reads. Dimensions, drawings and the certifications valid for a model come from that model’s own record.

05 — Where they work

Rooms that ask
for quiet light.

Scenes are photographed in real, sellable interiors in Europe and North America, with the fixture as the subject and the light visible on the wall or on the artwork.

Residential interiors Image placeholder

Residential interiors

Living rooms, hallways, staircases and bedrooms, where a wall light has to look right in daylight as well as at night.

Museums & galleries Image placeholder

Museums & galleries

Picture lighting for hung collections, where beam angle, colour rendering and glare control are specified per room.

Lighting & building-material channels Image placeholder

Lighting & building-material channels

Display and showroom sets for lighting stores, wholesalers and building-material channels that need the range to be easy to sell.

06 — How we work together

Three routes,
one supplier.

Start from the existing collection, adjust a catalogue model, or develop something new with our own engineering team. We confirm what is possible before you commit to anything.

01 / Existing collection

Order from the range

The fastest route: models that already exist, with known tooling, cost and lead time.

  • From 100 pcs per model as the standard minimum
  • 3–4 weeks batch production for standard models
  • Quantity tiers quoted as order volume grows
02 / Small modifications

Make it your version

Your brand and specification applied to a catalogue model, without starting a new development.

  • Logo, nameplate, manual and standard packing keep the 100 pcs minimum
  • Exclusive colours, finishes, dedicated parts, battery or electrical changes are quoted at our suppliers’ own minimum quantity, normally above 100 pcs
  • Printed artwork is confirmed in writing before production starts
03 / OEM & ODM development

Build something new

For programmes with their own volume, budget and long-term value, we develop from a brief.

  • Appearance, dimensions, material, finish, light source, electrical parameters, brightness, mounting, accessories, battery and packaging can all be adjusted
  • Tooling is normally at the customer’s cost, and can be shared for programmes with higher purchasing potential
  • Price and specification are agreed before the project starts, with samples verified and sealed before mass production

07 — Manufacturing & quality

Developed and built
in one place.

Nearly twenty years in LED lighting, with our own product development team and a stable supplier base behind every order.

In-house engineering Electronics, structure, product, sourcing, production and quality roles work from one specification.
Small-batch production Runs that larger factories pass over, with the tooling kept for the repeat order.
Tested before release Engineering verification plus high and low voltage, drop and vibration testing.
Quality to the sealed sample Control runs from production through to shipment, against the confirmed specification.

The same team, from drawing to shipment.

We do not trade quality for price. Target price and the price we can realistically deliver are agreed before a project advances, and batch production follows the confirmed specification and the sealed sample.

Printed items — nameplate, packaging, manual and carton — are checked by the product team and confirmed in writing before production.

Discuss a project See the process
  • Electronic, structural, product, sourcing, production and quality roles inside one team
  • Engineering verification with high and low voltage, drop and vibration testing
  • Quality control from the production stage through to shipment
  • Batch consistency against the confirmed specification and the sealed sample
  • Customer or third-party factory inspection accepted at the factory

08 — Working process

From enquiry
to delivered order.

Six steps, each with a clear decision. Nothing starts until the specification and the price are agreed on both sides.

  1. Enquiry

    Tell us the family, the target market and the quantity. Certification, packaging, delivery and target price requirements come next.

  2. Specification and price alignment

    We confirm what the model can do, then agree the target price before the project advances.

  3. Sample, verification and sealing

    Samples are made, engineering-verified and tested, then sealed as the reference for production. Selected projects reach sample stage in about one month.

  4. Mass production

    Production follows the confirmed specification and the sealed sample. Standard models run 3–4 weeks per batch.

  5. Quality control and inspection

    Quality is controlled from the production stage through to shipment. You or your third-party inspector are welcome at the factory.

  6. OEM documentation, delivery and warranty

    Nameplate, manual, colour box and carton are produced to your brand and confirmed in writing, followed by shipping support and a two-year warranty with compensation for defective units.

09 — Certification & compliance

Confirmed per model,
not assumed.

Compliance documents we hold cover part of the range. Before quotation we confirm the certificates and test reports that are valid for the specific model, market and requirement.

  • UL
  • ETL
  • CE
  • FCC
  • RoHS
  • GPSR
  • EPR
  • WEEE
  • ErP

Where an approval is not yet held for a model, it is quoted as an option with its own cost and lead time — a quotation only lists approvals that are currently valid for that model, and never implies that every model carries every approval.

10 — Who we work with

Built for specialist
buyers.

We serve small and mid-sized B2B customers who need flexible purchasing, workable minimums and continuous development support — rather than treating very large buyers as the only worthwhile target.

Lighting brands

Brand owners with their own channels who need product development, branding and packaging support.

Importers

Importers and distributors who need stable supply, the right documents for their market and export support.

Wholesalers & regional distributors

Range building across styles, power modes and price points, with repeatable supply.

Lighting stores

Small quantities that let a store test the market before committing to a larger order.

Building-material channels

Lighting lines that sit alongside building and interior material portfolios, including OEM programmes.

Museums & galleries

Picture lighting for hung collections, specified per room by beam angle and colour rendering.

Project customers with a continuing requirement are also welcome — if the volume, budget and development cost make sense for both sides, we will say so.

11 — Start an enquiry

Tell us the model,
market and quantity.

The more we know about the target market, quantity, certification and packaging, the faster we can answer with a price you can work with.

  • Enquiry desk Answered within 4 working hours — at the latest within 24.
  • Sampling Engineering review, samples, verification and sealing before production.
  • OEM & private label Delivered under your brand, or in neutral packing if you prefer.
  • Answered within 4 working hours
  • Checked against the model’s own specification
  • Handled under our privacy notice
Leave empty if the market is still open — we confirm per model.

We reply to business enquiries. Samples and tooling are quoted separately once the specification is agreed.